Avoid danger zones

It's one of the most gruesome images imaginable: someone being pulled into a roller conveyor and suffering horrific injuries. Such a scene haunted Interroll pioneer Dieter Specht, initiator of a new system called Avancon. His goal: an absolutely safe, new conveyor technology.
The impetus was reportedly, in part, that the US Occupational Safety and Health Administration (OSHA) officially reported 25 serious accidents involving roller and belt conveyors in 2017, two of which were fatal. Of course, the technology pioneer knew that all countries already had safety regulations for conveyor technology. "But even if a roller conveyor driven by round belts, poly-V belts, or other types is equipped with a safety device to prevent, for example, a finger from getting caught in it from the outside," the respected developer said, "there is no protection if you reach in from below.".
In the case that haunted him, a female employee with long, curly hair, carrying several small items, was walking past a conventional roller conveyor at an unnamed US company. One of the items fell and rolled under the conveyor. She bent down to pick it up from the back. At that moment, her hair was caught in the drive mechanism from below. Her head was jerked upwards, and part of her scalp was torn off. Colleagues immediately pressed the emergency stop button and pulled the seriously injured woman out of the danger zone. Specht: "I thought, how can a conveyor system still be so unsafe today? I then decided to develop a new conveyor concept in which all drive components are integrated into the enclosed frame to ensure absolute safety – even if someone gets caught in it from below."
Specht didn't just want to develop new rollers, a new profile system, or a different drive system, a new electronic control system, and certainly not develop everything in and around the rollers in the same way he had done it long before. "Today, rollers with fixed drive heads are obsolete."
His alternative: the "ZPC" system (Zone Powered Conveyor) with up to 84% reduced energy consumption. It features a closed frame system made of naturally anodized aluminum profiles, from which nothing protrudes—no screws, no rods, no cable connectors, no power supply boxes that could cause injury when walking past the conveyor. This is also important, for example, on the roller conveyors of baggage handling systems, which are now installed at several airports in the USA. Specht explains, "Nothing protrudes, not even a screw head." The extrusion process of the patented aluminum profiles allowed the system to be designed with internal ribs into which all components, such as ball bearing housings, controllers, photosensors, cables, and the new flat motor, simply snap into place. The two profile shells are held together at the end by a hammerhead screw, which also secures the footrests. Avancon SA, based in Riazzino, Ticino, now distributes the system worldwide through selected manufacturers of conveyor systems and system integrators for intralogistics systems.
TERMS FROM THE LI GLOSSARY
Conveyor technologyLI-NEWSLETTER
Every week, the latest logistics news from Switzerland, the EU and the rest of the world.
Subscribe now




























