Avancon: OTU frame turns conveyor lines into switches
Avancon, the Ticino-based conveyor technology manufacturer, now offers its omnidirectional transfer units (OTUs) as pre-assembled frames. These can be installed at any point in an existing conveyor line, transforming it into a diverter, transfer unit, or sorter.
The pre-assembled OTU frame replaces several rollers in the conveyor line and diverts the conveyed material laterally. (Image source: Avancon)
FACTS
- Pursue
- Avancon SA
- Location
- Riazzino TI
- Theme
- OTU frames for switches, transfers and sorters in conveyor systems
- In numbers
- Up to 12 OTUs with 2 motors, 133 mm high
Whether it's a large intralogistics system, an airport security checkpoint, or a smaller conveyor system: almost everywhere, goods need to be distributed from the main route to different destinations. Avancon SA from Riazzino relies on a single component for this: the patented Omnidirectional Transfer Unit, or OTU for short. Previously, the company supplied it as a fully assembled table or in pre-assembled rows. Now, a frame construction made of aluminum profiles is being added.
Wheels out, frame in
For installation, some conveyor rollers are removed at the desired location and the OTU frame is inserted. If an outgoing conveyor is provided on the right or left, cartons, containers, trays, and other units can be immediately diverted. A flat bottom for the conveyed goods is required. System integrators and conveyor manufacturers can also produce the frame themselves.
Depending on the shape and size of the conveyed goods, two OTU lines may suffice, either as a single or double line, or a complete OTU table may be required. Avancon supplies the power supply, firmware, and photosensor upon request.
Pre-assembled OTU lines between two roller conveyors: Up to twelve modules per line are driven by just two motors. (Image source: Avancon)
One building block for many tasks
The same design allows for the construction of 45-degree switches, corners, transitions to a parallel conveyor belt, singulation units, distributors for one or more lanes, and complete sorting systems. Because the building block and structure always remain the same, manufacturers and integrators can forgo special designs, such as those involving pneumatics. Even small parts can be transported, as they can be offset by half an OTU module.
Up to 50 percent lower costs
According to Avancon, costs are reduced by up to 50 percent because a line with up to twelve OTU modules requires only two motors. The units are 133 mm high, meaning they are, depending on the frame, barely taller than the conveyor frames themselves. This allows two or more OTU tables to be stacked on top of each other in a confined space.
OTU tables as switches and transfer points in a larger conveyor system. (Image source: Avancon)
Avancon was founded in 2015 in the canton of Ticino and develops patented conveyor technology, including applications for airport security checks, packaging lines, sorting systems, and warehousing and intralogistics. The company provides technical details and application examples for the OTU series on its website.
LI-NEWSLETTER
Every week, the latest logistics news from Switzerland, the EU and the rest of the world.
Subscribe now




























